List of Opcodes

The scripting engine used in Explorers of Sky has different opcodes. ExplorerScript translates most of them literally, preserving the same parameters and functionality. However, some opcodes are translated to ExplorerScript constructs, such as if statements.

This article documents the different opcodes, their purpose and parameters. The purpose of unkX parameters is unknown.

Relevant Opcodes

These opcodes can be directly called from ExplorerScript.

0x0 - Null

Does nothing.

No parameters.

0x1 - back_ChangeGround

Sets the Map Background from a Level without changing the chunks from the currently loaded Map Background. Entities such as actors, objects, and performers will not be deleted when this opcode is executed.

This has very few uses in the game—a notable use is how Wigglytuff's Chamber has its door open, as seen via LEVEL_G01P04A and LEVEL_G01P04A2.

Parameters
#	Type	Name	Description
1	Level	level_id	An entry in the Level List. This opcode will pull from the Level's Map Background.

0x2 - back_SetBackEffect

Performs various effects related to the currently loaded Animation Palettes.

Parameters
#	Type	Name	Description
1	uint	effect	The default state of the Animation Palette. Plays the Animation Palette in a loop. Plays the Animation Palette once. Freezes the Animation Palette at its current frame. Resumes the Animation Palette.

0x3 - back_SetBackScrollOffset

Shifts the background by a certain number of pixels, without affecting entities such as actors, objects, or performers. Backgrounds used with this opcode will display a "loop" effect, i.e., it has the appearance of scrolling forever.

This opcode seems to only work for only a few Levels, such as LEVEL_P13P01A, LEVEL_S13P06A, and LEVEL_V03P11A.

Parameters
#	Type	Name	Description
1	sint	offset0	The number of pixels to shift either: The Map Background's Layer 1 and Layer 2 X-axis. The Map Background's Layer 1 X-axis. Which one the game performs for a given Level seems to be hardcoded.
2	sint	offset1	The number of pixels to shift either: The Map Background's Layer 1 and Layer 2 Y-axis. The Map Background's Layer 2 X-axis. Which one the game performs for a given Level seems to be hardcoded.

0x4 - back_SetBackScrollSpeed

Continuously scrolls the background at a certain speed, without affecting entities such as actors, objects, or performers. Backgrounds used with this opcode will display a "loop" effect, i.e., it has the appearance of scrolling forever.

This opcode seems to only work for only a few Levels, such as LEVEL_P13P01A, LEVEL_S13P06A, and LEVEL_V03P11A.

Parameters
#	Type	Name	Description
1	sint	speed0	The speed to scroll either: The Map Background's Layer 1 and Layer 2 X-axis. The Map Background's Layer 1 X-axis. Which one the game performs for a given Level seems to be hardcoded.
2	sint	speed1	The speed to scroll either: The Map Background's Layer 1 and Layer 2 Y-axis. The Map Background's Layer 2 X-axis. Which one the game performs for a given Level seems to be hardcoded.

0x5 - back_SetBanner

Displays broken text using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	sint	chapter_number	The chapter number displayed for the banner. A value of -1 will be "Final Chapter".
2	uint	unk1	Currently unknown.

0x6 - back_SetBanner2

Displays text using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode is typically used for chapter introductions, which includes chapter text and a subtitle displayed over a Map Background. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	Level	level	An entry in the Level List. This opcode will pull from the Level's Map Background.
2	uint	unk1	Currently unknown. Typically, the game uses 0 for this parameter, but it seems to have no effect.
3	uint	x	The pixel position the camera will center the Map Background on its X-axis.
4	uint	y	The pixel position the camera will center the Map Background on its Y-axis.
5	sint	chapter_number	The chapter number displayed for the banner. A value of -1 will be "Final Chapter".
6	String	title	The title of the chapter, e.g., "A Storm At Sea" for Chapter 1.

0x7 - back_SetEffect

Performs various effects related to the current Map Background's layers across a certain number of frames.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames used to play a given effect.
2	uint	effect	Transitions from Layer 2 to Layer 1. Fades in Layer 1 from total darkness. Transitions from Layer 2 to Layer 1. Fades in Layer 1 from total darkness. Transitions from Layer 1 to Layer 2. Fades out Layer 1 to total darkness. Merges Layer 1 onto Layer 2, but fades in Layer 1 from total darkness. Fades in Layer 1 from total darkness. Merges Layer onto Layer 2, but fades out Layer 1 to total darkness. Fades out Layer 1 to total darkness.

0x8 - back_SetDungeonBanner

Displays a specific string using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. The text chosen is defined in Dungeons tab as a dungeon's back_SetDunegonBanner string. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	uint	dungeon_id	The ID of a dungeon, as listed in the Dungeons tab of SkyTemple.
2	uint	unk1	Currently unknown. Does not seem to affect much.

0x9 - back_SetGround

Sets the Map Background from a Level. Upon using this opcode, the variable $GROUND_MAP will be updated to match the ID of the chosen Level. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	Level	level_id	An entry in the Level List. This opcode will pull from the Level's Map Background.

0xa - back_SetSpecialEpisodeBanner

Displays text using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode is used for Special Episodes 1-3. This opcode plays a short animation of a green line shooting across the screen, followed by text scrolling across the screen horizontally from opposite directions. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	sint	episode_number	The episode number displayed for the banner. A value of -1 will be "Final Chapter".
2	String	title	The title of the episode, e.g., "Bidoof's Wish" for Special Episode 1.

0xb - back_SetSpecialEpisodeBanner2

Displays text using the FONT/banner_c.bin:FONT/b_pal_r.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode is only used for Special Episode 4. This opcode features an elaborate animation featuring hearts and sparkles, along with text scrolling across the screen horizontally from opposite directions. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	sint	episode_number	The episode number displayed for the banner. A value of -1 will be "Final Chapter".
2	String	title	The title of the episode, e.g., "Bidoof's Wish" for Special Episode 1.

0xc - back_SetSpecialEpisodeBanner3

Displays text using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode is only used for Special Episode 5. This opcode features no animation, but the end result is similar to the opcode back_SetSpecialEpisodeBanner. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	sint	episode_number	The episode number displayed for the banner. A value of -1 will be "Final Chapter".
2	String	title	The title of the episode, e.g., "Bidoof's Wish" for Special Episode 1.

0xd - back_SetTitleBanner

Displays user-defined text using the FONT/banner.bin:FONT/b_pal.bin font, editable in the Misc. Graphics tab of SkyTemple. This opcode will delete any actors, objects, and performers that are currently loaded.

Parameters
#	Type	Name	Description
1	uint	y	The Y-axis pixel position of the title.
2	String	title	The title displayed onscreen.

0xe - back_SetWeather

Displays a weather effect that overlays the current Map Background.

Parameters
#	Type	Name	Description
1	sint	weather_id	Values of 0 and below mean no weather effect is to be displayed. Dark, unmoving clouds. Dark, unmoving clouds. Clouds. No weather. Clouds. Unknown; seems to either softlock the game or drastically change the current Map Background. Fog. No weather. Unknown; does not seem to have a visible effect, but it loads something into memory. Unknown; seems to either softlock the game or drastically change the current Map Background. Purple smog.

0xf - back_SetWeatherEffect

Currently unknown. The only values this opcode accepts seems to be 1, 2, and 3. Its only known use is in V00P02/m01a04a.ssb, which is a test script used by the developers.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.

0x10 - back_SetWeatherScrollOffset

Currently unknown. This opcode is not used in the base game.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.

0x11 - back_SetWeatherScrollSpeed

Currently unknown. This opcode is not used in the base game.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.

0x12 - back2_SetBackEffect

The same as back_SetBackEffect, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	effect	The default state of the Animation Palette. Plays the Animation Palette in a loop. Plays the Animation Palette once. Freezes the Animation Palette at its current frame. Resumes the Animation Palette.

0x13 - back2_SetBackScrollOffset

The same as back_SetBackScrollOffset, but for the Top Screen.

Parameters
#	Type	Name	Description
1	sint	offset0	The number of pixels to shift either: The Map Background's Layer 1 and Layer 2 X-axis. The Map Background's Layer 1 X-axis. Which one the game performs for a given Level seems to be hardcoded.
2	sint	offset1	The number of pixels to shift either: The Map Background's Layer 1 and Layer 2 Y-axis. The Map Background's Layer 2 X-axis. Which one the game performs for a given Level seems to be hardcoded.

0x14 - back2_SetBackScrollSpeed

The same as back_SetBackScrollSpeed, but for the Top Screen.

Parameters
#	Type	Name	Description
1	sint	speed0	The speed to scroll either: The Map Background's Layer 1 and Layer 2 X-axis. The Map Background's Layer 1 X-axis. Which one the game performs for a given Level seems to be hardcoded.
2	sint	speed1	The speed to scroll either: The Map Background's Layer 1 and Layer 2 Y-axis. The Map Background's Layer 2 X-axis. Which one the game performs for a given Level seems to be hardcoded.

0x15 - back2_SetData

Currently unknown. This opcode is not used in the base game.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.

0x16 - back2_SetEffect

The same as back_SetEffect, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames used to play a given effect.
2	uint	effect	Transitions from Layer 2 to Layer 1. Fades in Layer 1 from total darkness. Transitions from Layer 2 to Layer 1. Fades in Layer 1 from total darkness. Transitions from Layer 1 to Layer 2. Fades out Layer 1 to total darkness. Merges Layer 1 onto Layer 2, but fades in Layer 1 from total darkness. Fades in Layer 1 from total darkness. Merges Layer onto Layer 2, but fades out Layer 1 to total darkness. Fades out Layer 1 to total darkness.

0x17 - back2_SetGround

Mostly the same as back_SetGround, but for the Top Screen. This opcode only works if back2_SetMode(4); is used prior to this opcode.

Parameters
#	Type	Name	Description
1	Level	level_id	An entry in the Level List. This opcode will pull from the Level's Map Background.

0x18 - back2_SetMode

Determines a hardcoded status of the Top Screen.

Parameters
#	Type	Name	Description
1	sint	mode_id	A value of 0 is no mode. A negative value seems to set the Top Screen to the overworld's current Top Screen setting. Fades out the Top Screen. Team Stats. The Map Background S01P01A with the hero idling on a World Map Marker. Allows for the Top Screen to display a Map Background from a Level using the `back2_SetGround` opcode. Splits the Map Background used in the Level defined by `back_SetGround` equally between the Top and Touch Screen. Splits the Map Background used in the Level defined by `back_SetGround` between the Top and Touch Screen.

0x19 - back2_SetSpecialActing

Currently unknown.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.
3	uint	unk2	Currently unknown.

0x1a - back2_SetWeather

The same as back_SetWeather, but for the Top Screen.

Parameters
#	Type	Name	Description
1	sint	weather_id	Values of 0 and below mean no weather effect is to be displayed. Dark, unmoving clouds. Dark, unmoving clouds. Clouds. No weather. Clouds. Unknown; seems to either softlock the game or drastically change the current Map Background. Fog. No weather. Unknown; does not seem to have a visible effect, but it loads something into memory. Unknown; seems to either softlock the game or drastically change the current Map Background. Purple smog.

0x1b - back2_SetWeatherEffect

Currently unknown. Potentially has similar functionality as back_SetWeatherEffect, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.

0x1c - back2_SetWeatherScrollOffset

Currently unknown. Potentially has similar functionality as back_SetWeatherScrollOffset, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.

0x1d - back2_SetWeatherScrollSpeed

Currently unknown. Potentially has similar functionality as back_SetWeatherScrollSpeed, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.
2	uint	unk1	Currently unknown.

0x1e - bgm_FadeOut

Fades out the BGM that is currently playing over a certain period of time on the first BGM track.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames used to fade out and silence a given BGM.

0x1f - bgm_Play

Instantly plays a BGM on the first BGM track.

Parameters
#	Type	Name	Description
1	Bgm	bgm_id	A music track defined in SOUND/BGM of the ROM.

0x20 - bgm_PlayFadeIn

Starts playing a BGM over a certain period of time and at a certain volume on the first BGM track.

Parameters
#	Type	Name	Description
1	Bgm	bgm_id	A music track defined in SOUND/BGM of the ROM.
2	uint	duration	The number of frames to fade in the BGM.
3	uint	volume	The volume that the BGM will play at. It has a maximum of 256 and a minimum of 0.

0x21 - bgm_Stop

Instantly stops the BGM that is currently playing on the first BGM track.

No parameters.

0x22 - bgm_ChangeVolume

Changes the volume of the BGM that is currently playing on the first BGM track.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames to change the BGM's volume.
2	uint	volume	The volume that the BGM will play at. It has a maximum of 256 and a minimum of 0.

0x23 - bgm2_FadeOut

Fades out the BGM that is currently playing over a certain period of time on the second BGM track.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames used to fade out and silence a given BGM.

0x24 - bgm2_Play

Instantly plays a BGM on the second BGM track.

Parameters
#	Type	Name	Description
1	Bgm	bgm_id	A music track defined in SOUND/BGM of the ROM.

0x25 - bgm2_PlayFadeIn

Starts playing a BGM over a certain period of time and at a certain volume on the second BGM track.

Parameters
#	Type	Name	Description
1	Bgm	bgm_id	A music track defined in SOUND/BGM of the ROM.
2	uint	duration	The number of frames to fade in the BGM.
3	uint	volume	The volume that the BGM will play at. It has a maximum of 256 and a minimum of 0.

0x26 - bgm2_Stop

Instantly stops the BGM that is currently playing on the second BGM track.

No parameters.

0x27 - bgm2_ChangeVolume

Changes the volume of the BGM that is currently playing on the second BGM track.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames to change the BGM's volume.
2	uint	volume	The volume that the BGM will play at. It has a maximum of 256 and a minimum of 0.

0x38 - CallCommon

Jumps to the specified Unionall Coroutine, runs its code, and returns to the line of code in which this opcode was used (only if return; was used in the Coroutine). This opcode can be used in any script, no matter the type (Common, Enter, Acting, or Sub).

If used in the context of an actor/object/performer, this should not be used in with-statements.

Parameters
#	Type	Name	Description
1	Coroutine	coro_id	One of the 701 possible Unionall Coroutines.

0x39 - camera_Move2Default

Moves the camera toward an active Type 1 actor (e.g., ACTOR_PLAYER) without restricting the angles used.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x3a - camera_Move2MyPosition

Moves the camera toward a specific entity's position (i.e., an actor, object, or performer) without restricting the angles used.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x3b - camera_Move2Myself

Moves the camera toward a specific entity (i.e., an actor, object, or performer) without restricting the angles used.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x3c - camera_Move2PositionMark

Moves the camera to one or more Position Marks without restricting the angles used.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x3d - camera_Move2PositionMark

Moves the camera to a Position Mark without restricting the angles used.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x3e - camera_Move3Default

Moves the camera toward an active Type 1 actor (e.g., ACTOR_PLAYER) in a rapid, strange motion.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x3f - camera_Move3MyPosition

Moves the camera toward a specific entity's position (i.e., an actor, object, or performer) in a rapid, strange motion.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x40 - camera_Move3Myself

Moves the camera toward a specific entity (i.e., an actor, object, or performer) in a rapid, strange motion.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x41 - camera_Move3PositionMark

Moves the camera to one or more Position Marks in a rapid, strange motion.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x42 - camera_Move3PositionMark

Moves the camera to a Position Mark without restricting the angles used.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x43 - camera_MoveDefault

Moves the camera toward an active Type 1 actor (e.g., ACTOR_PLAYER) while restricting movement by eight angles—as if movement was performed using the D-Pad.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x44 - camera_MoveMyPosition

Moves the camera toward a specific entity's position (i.e., an actor, object, or performer) while restricting movement by eight angles—as if movement was performed using the D-Pad.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x45 - camera_MoveMyself

Moves the camera toward a specific entity (i.e., an actor, object, or performer) while restricting movement by eight angles—as if movement was performed using the D-Pad.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x46 - camera_MovePositionMark

Moves the camera to one or more Position Marks while restricting movement by eight angles—as if movement was performed using the D-Pad.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x47 - camera_MovePositionMark

Moves the camera to a Position Mark while restricting movement by eight angles—as if movement was performed using the D-Pad.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x48 - camera_SetDefault

Instantly sets the camera to a Type 1 actor (e.g., ACTOR_PLAYER).

No parameters.

0x49 - camera_SetEffect

Continuously shakes the camera at specified intensities. Entities will be affected by the camera shaking, but not textboxes and portraits. The camera will continue to shake even if it is moved using another opcode.

Parameters
#	Type	Name	Description
1	uint	mode	Values of 0 or 3+ mean the camera will not shake. Erratic, jerky shaking. Subdued, smoother shaking.
2	uint	intensity	The intensity of the shake. Higher values will result in a more intense shake.
3	uint	speed	Movement speed. Higher values result in a slower speed.

0x4a - camera_SetMyPosition

Instantly sets the camera toward a specific entity's position (i.e., an actor, object, or performer).

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

No parameters.

0x4b - camera_SetMyself

Instantly sets the camera to a specific entity (i.e., an actor, object, or performer). Once performed, the camera will now follow the entity wherever it moves.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

No parameters.

0x4c - camera_SetPositionMark

Instantly sets the camera to a Position Mark.

Parameters
#	Type	Name	Description
1	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x4d - camera2_Move2Default

The same as camera_Move2Default, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x4e - camera2_Move2MyPosition

The same as camera_Move2MyPosition, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x4f - camera2_Move2Myself

The same as camera_Move2Myself, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x50 - camera2_Move2PositionMark

The same as camera_Move2PositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x51 - camera2_Move2PositionMark

The same as camera_Move2PositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x52 - camera2_Move3Default

The same as camera_Move3Default, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x53 - camera2_Move3MyPosition

The same as camera_Move3MyPosition, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x54 - camera2_Move3Myself

The same as camera_Move3Myself, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.

0x55 - camera2_Move3PositionMark

The same as camera_Move3PositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x56 - camera2_Move3PositionMark

The same as camera_Move3PositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Supposedly movement speed based off of similar opcodes, but does not seem to affect much.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x57 - camera2_MoveDefault

The same as camera_MoveDefault, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x58 - camera2_MoveMyPosition

The same as camera_MoveMyPosition, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x59 - camera2_MoveMyself

The same as camera_MoveMyself, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.

0x5a - camera2_MovePositionMark

The same as camera_MovePositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	num_parameters	The number of parameters to read from this opcode.
2+	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x5b - camera2_MovePositionMark

The same as camera_MovePositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	speed	Movement speed. Higher values result in a faster speed. 0 will result in an instant movement. Values starting at 32770 and above will be slower than a value of 1.
2	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels.

0x5c - camera2_SetDefault

The same as camera_SetDefault, but for the Top Screen.

No parameters.

0x5d - camera2_SetEffect

The same as camera_SetEffect, but for the Top Screen.

Parameters
#	Type	Name	Description
1	uint	mode	Values of 0 or 3+ mean the camera will not shake. Erratic, jerky shaking. Subdued, smoother shaking.
2	uint	intensity	The intensity of the shake. Higher values will result in a more intense shake.
3	uint	speed	Movement speed. Higher values result in a slower speed.

0x5e - camera2_SetMyPosition

The same as camera_SetMyPosition, but for the Top Screen.

No parameters.

0x5f - camera2_SetMyself

The same as camera_SetMyself, but for the Top Screen.

No parameters.

0x60 - camera2_SetPositionMark

The same as camera_SetPositionMark, but for the Top Screen.

Parameters
#	Type	Name	Description
1	PositionMark	pos_marker	A structure consisting of a name, X unit, and Y unit. Units are defined as 8 pixels. This parameter may be repeated multiple times.

0x61 - CancelCut

Reverses the effects of the opcode CancelRecoverCommon, i.e., disallows the game from reloading Unionall at a Coroutine by pressing the Start button.

No parameters.

0x62 - CancelRecoverCommon

Allows reloading Unionall at a specified Coroutine by pressing the Start button. This can be done in a cutscene and the overworld.

Once the Start button is pressed, the game will stop the current script, fade out the entire screen, and reload Unionall and begin running code at the specified Coroutine.

Parameters
#	Type	Name	Description
1	Coroutine	coro_id	One of the 701 possible Unionall Coroutines.

0x6a - debug_Assert

Does nothing in the final game.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.

0x6b - debug_Print

Does nothing in the final game.

If the script is running using SkyTemple's debugger and the "Script Debug" checkbox is ticked, the specified string will be printed to the Debug Log.

Parameters
#	Type	Name	Description
1	ConstString	txt	A string to be printed to the Debug Log.

0x6c - debug_PrintFlag

Does nothing in the final game.

If the script is running using SkyTemple's debugger and the "Script Debug" checkbox is ticked, the specified string will be printed to the Debug Log, along with the value of the specified script variable.

Parameters
#	Type	Name	Description
1	GameVar	var	One of the 115 possible script variables. Indexed variables are not encouraged to use, since the Debug Log will only read from the first index.
2	ConstString	txt	A string to be printed to the Debug Log.

0x6d - debug_PrintScenario

If the script is running using SkyTemple's debugger and the "Script Debug" checkbox is ticked, the specified string will be printed to the Debug Log, along with two indices of the specified script variable.

This opcode's Debug Log implementation currently seems broken, as it prints the first index of the specified variable twice.

Parameters
#	Type	Name	Description
1	GameVar	var	One of the 115 possible script variables. A two-indexed variable (e.g., $SCENARIO_MAIN) is encouraged to use.
2	ConstString	txt	A string to be printed to the Debug Log.

0x6f - Destroy

Instantly removes an active entity (i.e., an actor, object, or performer) from memory.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

No parameters.

0x71 - EndAnimation

Stops an actor or object's looping animation once it reaches the end of its animation frames.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

No parameters.

0x72 - ExecuteActing

Currently unknown.

Parameters
#	Type	Name	Description
1	uint	unk0	Currently unknown.

0x73 - ExecuteCommon

Jumps to a Unionall Coroutine, runs its code, and returns to the line in which this opcode was called. This opcode should be called if the specified Coroutine ends with hold;. Typically, the base game uses this command with Coroutines whose names end with "FUNC_SERIES".

This opcode does not have a parameter for an entity, as it must be used in a with-statement.

Parameters
#	Type	Name	Description
1	Routine	coro_id	One of the 701 possible Unionall Coroutines.
2	uint	unk1	Unknown.

0x81 - Flash

Currently unknown; it does not seem to affect much. This opcode is not used in the base game.

No parameters.

0x83 - item_GetVariable

Saves the value in a specific item slot (set by item_Set) to a script variable.

Parameters
#	Type	Name	Description
1	uint	slot	An item slot used by many `item_` opcodes.
2	GameVar	var	One of the 115 possible script variables.

0x84 - item_Set

Sets an item into an item slot, which can be used by other various item_ opcodes.

Items in slot 0 may also be added to the player's bag and storage with hardcoded menus, such as message_Menu(MENU_GIVE_ITEM); and message_Menu(MENU_GIVE_ITEM2);, respectively. Additionally, the text tag [s_item:X] will display the item's name, where X is the item slot number.

Parameters
#	Type	Name	Description
1	uint	slot	An item slot used by many `item_` opcodes.
2	uint	item_id	The ID of the item, where all are listed in the Items tab of SkyTemple.
3	uint	item_stack	The stack count of an item, if it belongs to a Thrown category. Treasure Boxes will also use this as the item earned when opening the box at Xatu's Appraisal.

0x85 - item_SetTableData

Sets a random item from predefined tables into an item slot, which can be used by other various item_ opcodes. This opcode is used mainly in Spinda's Cafe, for redeeming a random Recycle Shop prize and for receiving items from Treasure Town NPCs after giving them Sky Gifts.

Items in slot 0 may also be added to the player's bag and storage with hardcoded menus, such as message_Menu(MENU_GIVE_ITEM); and message_Menu(MENU_GIVE_ITEM2);, respectively. Additionally, the text tag [s_item:X] will display the item's name, where X is the item slot number.

Parameters
#	Type	Name	Description
1	uint	slot	An item slot used by many `item_` opcodes.
2	uint	table	Some unknown item tables related to Spinda's Cafe.

0x86 - item_SetVariable

Saves the value of a script variable to an item slot. Items in slot 0 may also be added to the player's bag and storage with hardcoded menus, such as message_Menu(MENU_GIVE_ITEM); and message_Menu(MENU_GIVE_ITEM2);, respectively. Additionally, the text tag [s_item:X] will display the item's name, where X is the item slot number.

Parameters
#	Type	Name	Description
1	uint	slot	An item slot used by many `item_` opcodes.
2	GameVar	var	One of the 115 possible script variables.

0x88 - JumpCommon

Jumps to the specified Unionall Coroutine and runs its code, without returning to the line in which this opcode was first used. This opcode can be used in any script, no matter the type (Common, Enter, Acting, or Sub), but is mostly used by the base game in Unionall.

If attempting to execute a Unionall Coroutine from inside an Enter, Acting, or Sub script to play Acting scripts, use supervision_ExecuteCommon instead.

Parameters
#	Type	Name	Description
1	Coroutine	coro_id	One of the 701 possible Unionall Coroutines.

0x8a - LoadPosition

Sets various attributes of an entity (i.e., an actor, object, or performer) to the values of all indexed $POSITION_ script variables. These include changing the entity's X and Y coordinates, height, and direction.

This opcode does not have a parameter for an entity, as it must be used in a with-statement or a targeted routine.

Parameters
#	Type	Name	Description
1	uint	index	Index used by all `$POSITION_` script variables, ranged from 0-2 (inclusive).

0x8b - Lock

Suspends the current routine until the opcode Unlock is called with the same lock_id.

Parameters
#	Type	Name	Description
1	uint	lock_id	The ID of a Lock, ranged from 0-19 (inclusive).

0x8c - main_EnterAdventure

Performs various functions related to entering a dungeon using the crossroads menu.

Parameters
#	Type	Name	Description
1	sint	mode	Most modes are not known, but: 32767 opens the dungeon selection menu. 251 stops the current script to reload Unionall starting from the Coroutine CORO_MOVE_WORLD_MAP.
2	uint	unk1	Currently unknown.

0x8d - main_EnterDungeon

Exits ground mode and begins dungeon mode at a specific dungeon.

Parameters
#	Type	Name	Description
1	sint	dungeon_id	The dungeon ID to enter, which are all listed in the Dungeons tab of SkyTemple. A value of -1 actually enters dungeon mode—it is insufficient to use this opcode a single time to enter a specific dungeon.
2	uint	duration	The number of frames to fade out the screens.

0x8e - main_EnterGround

Stops the current script to reload Unionall starting from the Coroutine CORO_EVENT_DIVIDE. This opcode also updates the following script variables:

$GROUND_ENTER: This opcode's level_id_enter parameter.
$GROUND_ENTER_LINK: Set to 0.
$GROUND_GETOUT: The value of $GROUND_ENTER prior to using this opcode.
$GROUND_MAP: The Level ID used to display the Map Background.
$GROUND_PLACE: The World Map Marker ID that determines where the player appears on the Top Screen when selecting "Map and team" in the overworld.
$GROUND_START_MODE: Set to 3.

In the base game, using this opcode allows for transitioning between Levels in the Overworld, as the game will eventually run the supervision_ExecuteEnter opcode.

Parameters
#	Type	Name	Description
1	Level	level_id	An entry in the Level List. Ideally, this opcode would load the specified Level's Enter00 script.
2	uint	duration	The number of frames to fade out the screens.

0x8f - main_EnterGroundMulti

Stops the current script to reload Unionall starting from the Coroutine CORO_EVENT_DIVIDE. This opcode also updates the following script variables:

$GROUND_ENTER: This opcode's level_id_enter parameter.
$GROUND_ENTER_LINK: This opcode's level_id_link parameter.
$GROUND_GETOUT: The value of $GROUND_ENTER prior to using this opcode.
$GROUND_MAP: The Level ID used to display the Map Background.
$GROUND_PLACE: The World Map Marker ID that determines where the player appears on the Top Screen when selecting "Map and team" in the overworld.
$GROUND_START_MODE: Set to 3.

In the base game, using this opcode allows for transitioning between Levels in the Overworld, as the game will eventually run the supervision_ExecuteEnter opcode.

Parameters
#	Type	Name	Description
1	Level	level_id_enter	An entry in the Level List. Ideally, this opcode would load the specified Level's Enter00 script.
2	uint	duration	The number of frames to fade out the screens.
3	Level	level_id_link	An entry in the Level List. Used to update `$GROUND_ENTER_LINK`.

0x90 - main_EnterRescueUser

Exits ground mode and begins dungeon mode while taking an SOS Mail. Dungeon selection seems to be determined by the SOS Mail chosen via message_Menu(MENU_S_O_S_MAIL_PICKER);.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames to fade out the screens.

0x91 - main_EnterTraining

Performs various functions related to entering a dungeon using Marowak Dojo.

Parameters
#	Type	Name	Description
1	uint	mode	Most modes are not known, but: 32767 opens the generic dojo selection menu 251 goes to the Coroutine CORO_GOTO_TRAINING_DUNGEON, which later stops the current script to reload Unionall starting from the Coroutine CORO_ENTER_TRAINING_DUNGEON.
2	uint	unk1	Currently unknown.

0x92 - main_EnterTraining2

Performs various functions related to entering a dungeon using Marowak Dojo's Final Maze.

Parameters
#	Type	Name	Description
1	uint	mode	Most modes are not known, but: 32767 opens a dojo selection menu that only involves Final Maze. 251 goes to the Coroutine CORO_GOTO_TRAINING_DUNGEON, which later stops the current script to reload Unionall starting from the Coroutine CORO_ENTER_TRAINING_DUNGEON.
2	uint	unk1	Currently unknown.

0x93 - main_SetGround

Updates the following variables' values to be this opcode's level_id parameter:

$GROUND_ENTER
$GROUND_GETOUT

Parameters
#	Type	Name	Description
1	Level	level_id	An entry in the Level List.

0x94 - me_Play

Instantly plays a special sound effect that can seamlessly interrupt any BGM tracks that are currently playing.

Parameters
#	Type	Name	Description
1	uint	me_id	A sound effect defined in SOUND/ME of the ROM.

0x95 - me_Stop

Instantly stops the currently-playing special sound effect called with me_Play.

No parameters.

0x96 - message_Close

Suspends the current routine and allows for closing an active textbox (and portrait, if active) set by one of the following opcodes:

message_ImitationSound
message_Mail
message_Monologue
message_Notice
message_SpecialTalk
message_Talk

By pressing the A Button, B Button, or tapping the textbox via the Touch Screen. Once the textbox is closed, the current routine resumes.

No parameters.

0x97 - message_CloseEnforce

Instantly closes an active textbox (and portrait, if active) once the game finishes displaying a string set by one of the following opcodes:

message_ImitationSound
message_Mail
message_Monologue
message_Notice
message_SpecialTalk
message_Talk

No parameters.

0x98 - message_Explanation

Displays the string defined in the txt parameter centered in the middle of the Touch Screen. The string will appear without any frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple). This opcode does not need message_Close to suspend the routine.

This opcode does not support displaying a portrait. No sound will emit from the text scrolling.

Parameters
#	Type	Name	Description
1	String	txt	Text to be displayed on the Touch Screen.

0x99 - message_FacePositionOffset

Offsets the active portrait in pixels by multiples of 8.

Parameters
#	Type	Name	Description
1	sint	x	The offset to shift the portrait box across the X-axis.
2	sint	y	The offset to shift the portrait box across the Y-axis.

0x9a - message_ImitationSound

Displays the string defined in the txt parameter at the bottom of the Touch Screen. The string will appear surrounded by a player-chosen frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple).

This opcode does not support displaying a portrait. No sound will emit from the text scrolling.

Parameters
#	Type	Name	Description
1	String	txt	Text to be displayed on the Touch Screen.

0x9b - message_KeyWait

If an active textbox has finished displaying its string and was created by one of the following opcodes:

message_ImitationSound
message_Mail
message_Monologue
message_Notice
message_SpecialTalk
message_Talk

This opcode suspends the current routine until the A Button, B Button or textbox is pressed (via the Touch Screen). Once done so, the textbox will not close, but the current routine will resume.

No parameters.

0x9c - message_Mail

Displays the string defined in the txt parameter at the bottom of the Touch Screen. The string will appear surrounded by a player-chosen frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple).

This opcode does not support displaying a portrait. No sound will emit from the text scrolling.

Parameters
#	Type	Name	Description
1	String	txt	Text to be displayed on the Touch Screen.

0x9d - message_Menu

Executes various hardcoded "menu" functionalities given a certain ID. Some IDs result in an actual menu, while others simply perform a silent task.

Parameters
#	Type	Name	Description
1	Menu	menu_id	The ID of a menu, the list of which can be seen by typing `MENU_` in SkyTemple's Script Engine Debugger.

0x9e - message_Monologue

Displays the string defined in the txt parameter at the bottom of the Touch Screen. The string will appear surrounded by a player-chosen frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple).

This opcode supports displaying a portrait. No sound will emit from the text scrolling.

Parameters
#	Type	Name	Description
1	String	txt	Text to be displayed on the Touch Screen.

0x9f - message_Narration

Fades in the screen and instantly displays the string defined in the txt parameter centered in the middle of the Touch Screen. The string will appear without any frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple). This opcode does not need message_Close to suspend the routine. Once the routine is resumed (by pressing the A Button, B Button, or text via the Touch Screen), the screen will fade out, including the string.

Parameters
#	Type	Name	Description
1	uint	duration	The number of frames to fade in/out the Touch Screen.
2	String	txt	Text to be displayed on the Touch Screen.

0xa0 - message_Notice

Instantly displays the string defined in the txt parameter at the bottom of the Touch Screen. The string will appear surrounded by a player-chosen frame defined in FONT/frameX.wte (as seen in the Misc. Graphics tab of SkyTemple).

This opcode does not support displaying a portrait.

Parameters
#	Type	Name	Description
1	String	txt	Text to be displayed on the Touch Screen.

0xa1 - message_EmptyActor

Disallows a portrait from appearing alongside a textbox, along with disallowing a name to appear in the textbox if message_Talk follows this opcode.

No parameters.

0xa2 - message_ResetActor

Disallows a portrait from appearing alongside a textbox, along with setting a speech bubble (the text tag [M:T1]) to the start of next script string if message_Talk follows this opcode.

No parameters.

0xa3 - message_SetActor

Sets the specified actor's name to the start of the next script string if message_Talk follows this opcode.

Parameters
#	Type	Name	Description
1	Entity	actor_id	An entry in the Actor List.

0xa4 - message_SetFace

Sets the specified actor's name to the start of the next script string if message_Talk follows this opcode. Will also display a portrait of the actor's species at a specified position if message_Talk or message_Monologue follow this opcode.

Parameters
#	Type	Name	Description
1	Entity	actor_id	An entry in the Actor List.
2	Face	face_id	The ID of a portrait, the list of which can be seen by typing FACE_ in SkyTemple's Script Engine Debugger.
3	FaceMode	face_mode	The position of a portrait, the list of which can be seen by typing `FACE_POS_` in SkyTemple's Script Engine Debugger.

0xa5 - message_SetFaceEmpty

Displays a portrait of the actor's species at a specified position if message_Talk or message_Monologue follow this opcode.

Parameters
#	Type	Name	Description
1	Entity	actor_id	An entry in the Actor List.
2	Face	face_id	The ID of a portrait, the list of which can be seen by typing FACE_ in SkyTemple's Script Engine Debugger.
3	FaceMode	face_mode	The position of a portrait, the list of which can be seen by typing `FACE_POS_` in SkyTemple's Script Engine Debugger.

0xa6 - message_SetFaceOnly

Sets a speech bubble (the text tag [M:T1]) to the start of the next script string if message_Talk follows this opcode. Will also display a portrait of the actor's species at a specified position if message_Talk or message_Monologue follow this opcode.

Parameters
#	Type	Name	Description
1	Entity	actor_id	An entry in the Actor List.
2	Face	face_id	The ID of a portrait, the list of which can be seen by typing FACE_ in SkyTemple's Script Engine Debugger.
3	FaceMode	face_mode	The position of a portrait, the list of which can be seen by typing `FACE_POS_` in SkyTemple's Script Engine Debugger.

0xa7 - message_SetFacePosition

Repositions an actor's portrait.

Parameters
#	Type	Name	Description
1	FaceMode	face_mode	The position of a portrait, the list of which can be seen by typing `FACE_POS_` in SkyTemple's Script Engine Debugger.

0xa8 - message_SetWaitMode

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xa9 - message_SpecialTalk

Parameters
#	Type	Name	Description
1	uint	unk0

0xae - message_Talk

Displays text in the dialog box.

Parameters
#	Type	Name	Description
1	String	txt

0xaf - Move2Position

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0xb0 - Move2PositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xb1 - Move2PositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0xb2 - Move2PositionMark

Moves an actor to the position marker defined by the user. The speed of the movement is defined by the first parameter, with the actor moving faster with higher numbers. Notably, there exists numbers that will cause the actor to move slower than the speed of 1, generally these are around 32000, such as 32896. The actor will not be bound by the grid and can walk diagonally to reach the position defined.

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_marker

0xb3 - Move2PositionOffset

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	sint	x	This parameter may be repeated multiple times

0xb4 - Move2PositionOffset

Moves an actor to a position that is x and y units away from their current x and y position respectively. The speed of the movement is defined by the first parameter, with the actor moving faster with higher numbers. Notably, there exists numbers that will cause the actor to move slower than the speed of 1, generally these are around 32000, such as 32896. The actor will not be bound by the grid and can walk diagonally to reach the position defined.

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0xb5 - Move2PositionOffsetRandom

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0xb6 - Move3Position

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0xb7 - Move3PositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xb8 - Move3PositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0xb9 - Move3PositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2	PositionMark	pos_marker

0xba - Move3PositionOffset

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	sint	x	This parameter may be repeated multiple times

0xbb - Move3PositionOffset

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0xbc - Move3PositionOffsetRandom

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0xbd - MoveDirection

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xbe - MoveHeight

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xbf - MovePosition

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0xc0 - MovePositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xc1 - MovePositionLivesTime

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xc2 - MovePositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0xc3 - MovePositionMark

Moves an actor to the position marker defined by the user. The speed of the movement is defined by the first parameter, with the actor moving faster with higher numbers. Notably, there exists numbers that will cause the actor to move slower than the speed of 1, generally these are around 32000, such as 32896. The actor is bound by the grid and will move in cardinal directions and diagonally, but only in directions 45 degrees from the cardinal directions.

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_marker

0xc4 - MovePositionMarkTime

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	PositionMark	pos_marker

0xc5 - MovePositionOffset

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	sint	x	This parameter may be repeated multiple times

0xc6 - MovePositionOffset

Moves an actor to a position that is x and y units away from their current x and y position respectively. The speed of the movement is defined by the first parameter, with the actor moving faster with higher numbers. Notably, there exists numbers that will cause the actor to move slower than the speed of 1, generally these are around 32000, such as 32896. The actor is bound by the grid and will move in cardinal directions and diagonally, but only in directions 45 degrees from the cardinal directions.

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0xc7 - MoveSpecial

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xc8 - MoveTurn

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xca - PauseEffect

Parameters
#	Type	Name	Description
1	uint	unk0

0xcc - ProcessSpecial

Parameters
#	Type	Name
1	ProcessSpecial	process_id
2	uint	unk1
3	uint	unk2

0xcd - PursueTurnLives

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xce - PursueTurnLives2

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xcf - ResetAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xd0 - ResetFunctionAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xd1 - ResetHitAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xd2 - ResetOutputAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xd3 - ResetReplyAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xd4 - ResumeEffect

Parameters
#	Type	Name	Description
1	uint	unk0

0xd6 - SavePosition

Parameters
#	Type	Name	Description
1	uint	unk0

0xd7 - screen_FadeChange

Changes the brightness level of the screen.

Parameters
#	Type	Name	Description
1	bool	wait	If true, the game will wait for the brightness operation to finish before continuing
2	uint	frames	Number of frames taken to change the brightness
3	uint	start_brightness	Starting brightness level. Default brightness is 256.
4	uint	end_brightness	Final brightness level. Default brightness is 256.

0xd8 - screen_FadeChangeAll

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xd9 - screen_FadeIn

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xda - screen_FadeInAll

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xdb - screen_FadeOut

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xdc - screen_FadeOutAll

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xdd - screen_FlushChange

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5
7	uint	unk6
8	uint	unk7

0xde - screen_FlushIn

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5

0xdf - screen_FlushOut

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5

0xe0 - screen_WhiteChange

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xe1 - screen_WhiteChangeAll

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xe2 - screen_WhiteIn

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xe3 - screen_WhiteInAll

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xe4 - screen_WhiteOut

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xe5 - screen_WhiteOutAll

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xe6 - screen2_FadeChange

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xe7 - screen2_FadeChangeAll

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xe8 - screen2_FadeIn

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xe9 - screen2_FadeInAll

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xea - screen2_FadeOut

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xeb - screen2_FadeOutAll

Parameters
#	Type	Name	Description
1	bool	unk0
2	uint	duration

0xec - screen2_FlushChange

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5
7	uint	unk6
8	uint	unk7

0xed - screen2_FlushIn

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5

0xee - screen2_FlushOut

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3
5	uint	unk4
6	uint	unk5

0xef - screen2_WhiteChange

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xf0 - screen2_WhiteChangeAll

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0xf1 - screen2_WhiteIn

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xf2 - screen2_WhiteInAll

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xf3 - screen2_WhiteOut

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xf4 - screen2_WhiteOutAll

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xf5 - se_ChangePan

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xf6 - se_ChangeVolume

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xf7 - se_FadeOut

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xf8 - se_Play

Plays a sound effect.

Parameters
#	Type	Name	Description
1	uint	se_id	Sound effect ID. It's actually encoded as sound_bank_id << 8 + sound_id, but it can also be represented as an integer.

0xf9 - se_PlayFull

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xfa - se_PlayPan

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xfb - se_PlayVolume

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xfc - se_Stop

Parameters
#	Type	Name	Description
1	uint	unk0

0xfd - SetAnimation

Plays a sprite's animation, optionally changing its speed and animation flags.

Parameters
#	Type	Name	Description
1	uint	id	Animation table index. Converted to an animation id for the current sprite using the SetAnimation table.

0xfe - SetAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0xff - SetBlink

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x100 - SetDirection

Parameters
#	Type	Name	Description
1	Direction	direction

0x101 - SetDirectionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x102 - SetEffect

Parameters
#	Type	Name	Description
1	Effect	effect_id
2	uint	position_marker_id?

0x103 - SetFunctionAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0x104 - SetHeight

Parameters
#	Type	Name	Description
1	uint	unk0

0x105 - SetHitAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0x106 - SetMoveRange

Parameters
#	Type	Name
1	PositionMark	pos_marker
5	uint	unk4
6	uint	unk5

0x107 - SetOutputAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0x108 - SetPosition

Parameters
#	Type	Name	Description
1	uint	x
2	uint	y

0x109 - SetPositionInitial

No parameters.

0x10a - SetPositionLives

Parameters
#	Type	Name	Description
1	uint	unk0

0x10b - SetPositionMark

Parameters
#	Type	Name	Description
1	PositionMark	pos_marker

0x10c - SetPositionOffset

Parameters
#	Type	Name	Description
1	sint	x
2	sint	y

0x10d - SetPositionOffsetRandom

Parameters
#	Type	Name	Description
1	sint	x
2	sint	y

0x10e - SetReplyAttribute

Parameters
#	Type	Name	Description
1	uint	unk0

0x10f - SetupOutputAttributeAndAnimation

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x110 - Slide2Position

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0x111 - Slide2PositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x112 - Slide2PositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0x113 - Slide2PositionMark

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_mark

0x114 - Slide2PositionOffset

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	sint	x	These two parameters may be repeated multiple times
3+	sint	y	These two parameters may be repeated multiple times

0x115 - Slide2PositionOffset

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0x116 - Slide2PositionOffsetRandom

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0x117 - Slide3Position

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0x118 - Slide3PositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x119 - Slide3PositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0x11a - Slide3PositionMark

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_marker

0x11b - Slide3PositionOffset

Parameters
#	Type	Name	Description
1	uint	unk0
2+	sint	x	These two parameters may be repeated multiple times
3+	sint	y	These two parameters may be repeated multiple times

0x11c - Slide3PositionOffset

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0x11d - Slide3PositionOffsetRandom

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0x11e - SlideHeight

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x11f - SlidePosition

Parameters
#	Type	Name
1	uint	unk0
2	uint	x
3	uint	y

0x120 - SlidePositionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x121 - SlidePositionLivesTime

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x122 - SlidePositionMark

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	PositionMark	pos_marker	This parameter may be repeated multiple times

0x123 - SlidePositionMark

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_marker

0x124 - SlidePositionMarkTime

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	PositionMark	pos_marker

0x125 - SlidePositionOffset

Parameters
#	Type	Name	Description
1	uint	num_parameters
2+	sint	x	This parameter may be repeated multiple times

0x126 - SlidePositionOffset

Parameters
#	Type	Name
1	uint	unk0
2	sint	x
3	sint	y

0x127 - sound_FadeOut

Parameters
#	Type	Name	Description
1	uint	unk0

0x128 - sound_Stop

No parameters.

0x129 - StopAnimation

No parameters.

0x12a - supervision_Acting

Parameters
#	Type	Name	Description
1	uint	layer_id

0x12b - supervision_ActingInvisible

Parameters
#	Type	Name	Description
1	uint	layer_id

0x12c - supervision_ExecuteActing

Parameters
#	Type	Name
1	Level	level
2	ConstString	script_id
3	uint	unk2

0x12d - supervision_ExecuteActingSub

Parameters
#	Type	Name
1	Level	level
2	ConstString	script_id
3	uint	unk2

0x12e - supervision_ExecuteCommon

Parameters
#	Type	Name	Description
1	Routine	coro_id

0x12f - supervision_ExecuteEnter

Parameters
#	Type	Name	Description
1	uint	unk0

0x130 - supervision_ExecuteStation

Parameters
#	Type	Name
1	Level	level
2	ConstString	script_id
3	uint	unk2

0x131 - supervision_ExecuteStationCommon

Parameters
#	Type	Name	Description
1	Level	level
2	uint	unk1

0x132 - supervision_ExecuteStationCommonSub

Parameters
#	Type	Name	Description
1	Level	level
2	uint	unk1

0x133 - supervision_ExecuteStationSub

Parameters
#	Type	Name
1	Level	level
2	ConstString	script_id
3	uint	unk2

0x134 - supervision_ExecuteExport

Parameters
#	Type	Name	Description
1	ConstString	const

0x135 - supervision_ExecuteExportSub

Parameters
#	Type	Name	Description
1	ConstString	const

0x136 - supervision_LoadStation

Parameters
#	Type	Name	Description
1	Level	level
2	ConstString	script_id

0x137 - supervision_Remove

Parameters
#	Type	Name	Description
1	uint	unk0

0x138 - supervision_RemoveActing

Parameters
#	Type	Name	Description
1	uint	layer_id

0x139 - supervision_RemoveCommon

Parameters
#	Type	Name	Description
1	uint	unk0

0x13a - supervision_SpecialActing

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x13b - supervision_Station

Parameters
#	Type	Name	Description
1	uint	station_id

0x13c - supervision_StationCommon

Parameters
#	Type	Name	Description
1	uint	station_id

0x13d - supervision_Suspend

Parameters
#	Type	Name	Description
1	sint	unk0

0x13e - supervision2_SpecialActing

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x14c - Turn2Direction

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	Direction	direction

0x14d - Turn2DirectionLives

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	Entity	actor_id

0x14e - Turn2DirectionLives2

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x14f - Turn2DirectionMark

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	PositionMark	pos_marker
4	uint	unk6
5	uint	unk7

0x150 - Turn2DirectionTurn

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0x151 - Turn3

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	uint	unk3

0x152 - TurnDirection

Parameters
#	Type	Name	Description
1	Direction	direction

0x153 - TurnDirectionLives

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x154 - TurnDirectionLives2

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x155 - TurnDirectionMark

Parameters
#	Type	Name	Description
1	uint	unk0
2	PositionMark	pos_marker

0x156 - Unlock

Resumes the routine that was suspended when Lock was called with the specified lock_id.

Parameters
#	Type	Name	Description
1	uint	lock_id	The ID of a Lock, ranged from 0-19 (inclusive).

0x157 - Wait

Parameters
#	Type	Name	Description
1	uint	duration

0x158 - WaitAnimation

No parameters.

0x159 - WaitBackEffect

No parameters.

0x15a - WaitBack2Effect

No parameters.

0x15b - WaitBgm

Parameters
#	Type	Name	Description
1	Bgm	bgm_id

0x15c - WaitBgm2

Parameters
#	Type	Name	Description
1	Bgm	bgm_id

0x15d - WaitBgmSignal

No parameters.

0x15e - WaitEffect

No parameters.

0x15f - WaitEndAnimation

No parameters.

0x160 - WaitExecuteLives

Parameters
#	Type	Name	Description
1	Entity	actor_id

0x161 - WaitExecuteObject

Parameters
#	Type	Name	Description
1	Object	object_id

0x162 - WaitExecutePerformer

Parameters
#	Type	Name	Description
1	uint	performer_id

0x163 - WaitFadeIn

No parameters.

0x164 - WaitLockLives

Parameters
#	Type	Name	Description
1	uint	lock_id
2	Entity	actor

0x165 - WaitLockObject

Parameters
#	Type	Name	Description
1	uint	lock_id
2	Object	object

0x166 - WaitLockPerformer

Parameters
#	Type	Name	Description
1	uint	lock_id
2	uint	performer

0x167 - WaitLockSupervision

Parameters
#	Type	Name	Description
1	uint	unk0

0x168 - WaitMe

Parameters
#	Type	Name	Description
1	uint	unk0

0x169 - WaitMoveCamera

No parameters.

0x16a - WaitMoveCamera2

No parameters.

0x16b - WaitRandom

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x16c - WaitScreenFade

No parameters.

0x16d - WaitScreenFadeAll

No parameters.

0x16e - WaitScreen2Fade

No parameters.

0x16f - WaitSe

Parameters
#	Type	Name	Description
1	uint	se_id

0x170 - WaitSpecialActing

No parameters.

0x171 - WaitSubScreen

No parameters.

0x172 - WaitSubSpecialActing

No parameters.

0x173 - worldmap_BlinkMark

Parameters
#	Type	Name	Description
1	uint	unk0

0x174 - worldmap_ChangeLevel

Parameters
#	Type	Name	Description
1	uint	unk0

0x175 - worldmap_DeleteArrow

No parameters.

0x176 - worldmap_MoveCamera

Parameters
#	Type	Name	Description
1	uint	unk0

0x177 - worldmap_OffMessage

No parameters.

0x178 - worldmap_SetArrow

Parameters
#	Type	Name	Description
1	uint	unk0

0x179 - worldmap_SetCamera

Parameters
#	Type	Name	Description
1	uint	unk0

0x17a - worldmap_SetLevel

Parameters
#	Type	Name	Description
1	uint	unk0

0x17b - worldmap_SetMark

Parameters
#	Type	Name	Description
1	uint	unk0

0x17c - worldmap_SetMessage

Parameters
#	Type	Name	Description
1	String	txt

0x17d - worldmap_SetMessagePlace

Parameters
#	Type	Name	Description
1	uint	unk0

0x17e - worldmap_SetMode

Parameters
#	Type	Name	Description
1	uint	unk0

Other Opcodes

These opcodes cannot be directly called from ExplorerScript, since they are represented as higher-level constructs.

0x28 - Branch

Parameters
#	Type	Name
1	GameVar	var
2	uint	value
3	Addr	jump_address

0x29 - BranchBit

Parameters
#	Type	Name
1	GameVar	var
2	uint	index
3	Addr	jump_address

0x2a - BranchDebug

Parameters
#	Type	Name	Description
1	bool	param
2	Addr	jump_address

0x2b - BranchEdit

Parameters
#	Type	Name	Description
1	uint	param
2	Addr	jump_address

0x2c - BranchExecuteSub

Parameters
#	Type	Name	Description
1	uint	unk0
2	Addr	jump_address

0x2d - BranchPerformance

Parameters
#	Type	Name
1	uint	index
2	bool	value
3	Addr	jump_address

0x2e - BranchScenarioNow

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x2f - BranchScenarioNowAfter

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x30 - BranchScenarioNowBefore

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x31 - BranchScenarioAfter

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x32 - BranchScenarioBefore

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x33 - BranchSum

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2
4	Addr	jump_address

0x34 - BranchValue

Parameters
#	Type	Name
1	GameVar	var
2	Operator	operator
3	uint	value
4	Addr	jump_address

0x35 - BranchVariable

Parameters
#	Type	Name
1	GameVar	var
2	Operator	operator
3	GameVar	cmp_var
4	Addr	jump_address

0x36 - BranchVariation

Parameters
#	Type	Name	Description
1	uint	param
2	Addr	jump_address

0x37 - Call

Jumps to the specified address, runs code, and returns to the line of code in which this opcode was used (only if return; was used in the routine this opcode calls).

Parameters
#	Type	Name	Description
1	Addr	jump_address	The address to call, e.g., `call @label_0;` if `§label_0;` is defined in the script.

0x63 - Case

Parameters
#	Type	Name	Description
1	uint	value
2	Addr	jump_address

0x64 - CaseMenu

Parameters
#	Type	Name	Description
1	String	choice
2	Addr	jump_address

0x65 - CaseMenu2

Parameters
#	Type	Name	Description
1	uint?	choice?
2	Addr	jump_address

0x66 - CaseScenario

Parameters
#	Type	Name
1	Operator	operator
2	uint	value
3	Addr	jump_address

0x67 - CaseText

Parameters
#	Type	Name	Description
1	uint	value
2	String	display

0x68 - CaseValue

Parameters
#	Type	Name
1	Operator	operator
2	uint	value
3	Addr	jump_address

0x69 - CaseVariable

Parameters
#	Type	Name
1	Operator	operator
2	GameVar	var
3	Addr	jump_address

0x6e - DefaultText

Parameters
#	Type	Name	Description
1	String	txt

0x70 - End

No parameters.

0x74 - flag_CalcBit

Parameters
#	Type	Name
1	GameVar	var
2	uint	index
3	bool	value

0x75 - flag_CalcValue

Parameters
#	Type	Name
1	GameVar	var
2	CalcOperator	calc_operator
3	uint	value

0x76 - flag_CalcVariable

Parameters
#	Type	Name
1	GameVar	var
2	CalcOperator	calc_operator
3	GameVar	var_to_set_from

0x77 - flag_Clear

Parameters
#	Type	Name	Description
1	GameVar	var

0x78 - flag_Initial

Parameters
#	Type	Name	Description
1	GameVar	var

0x79 - flag_Set

Parameters
#	Type	Name	Description
1	GameVar	var
2	uint	value

0x7a - flag_ResetDungeonResult

No parameters.

0x7b - flag_ResetScenario

Parameters
#	Type	Name	Description
1	GameVar	var

0x7c - flag_SetAdventureLog

Parameters
#	Type	Name	Description
1	uint	unk0

0x7d - flag_SetDungeonMode

Parameters
#	Type	Name	Description
1	uint	dungeon_id
2	DungeonMode	dungen_mode

0x7e - flag_SetDungeonResult

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0x7f - flag_SetPerformance

Parameters
#	Type	Name	Description
1	uint	index
2	bool	value

0x80 - flag_SetScenario

Parameters
#	Type	Name
1	GameVar	var
2	uint	scenario_value
3	uint	level_value

0x82 - Hold

No parameters.

0x87 - Jump

Parameters
#	Type	Name	Description
1	Addr	jump_address

0x89 - lives

Parameters
#	Type	Name	Description
1	Entity	actor_id

0xaa - message_SwitchMenu

Parameters
#	Type	Name	Description
1	uint	unk0
2	uint	unk1

0xab - message_SwitchMenu2

Parameters
#	Type	Name
1	uint	unk0
2	uint	unk1
3	uint	unk2

0xac - message_SwitchMonologue

Parameters
#	Type	Name	Description
1	GameVar	var

0xad - message_SwitchTalk

Parameters
#	Type	Name	Description
1	GameVar	var

0xc9 - object

Parameters
#	Type	Name	Description
1	Object	object_id

0xcb - performer

Parameters
#	Type	Name	Description
1	uint	performer_id

0xd5 - Return

No parameters.

0x13f - Switch

Parameters
#	Type	Name	Description
1	GameVar	var

0x140 - SwitchDirection

Parameters
#	Type	Name	Description
1	Direction	direction

0x141 - SwitchDirectionLives

Parameters
#	Type	Name	Description
1	uint	unk0

0x142 - SwitchDirectionLives2

Parameters
#	Type	Name	Description
1	uint	unk0

0x143 - SwitchDirectionMark

Parameters
#	Type	Name	Description
1	PositionMark	pos_marker

0x144 - SwitchDungeonMode

Parameters
#	Type	Name	Description
1	uint	dungeon_id

0x145 - SwitchLives

Parameters
#	Type	Name	Description
1	uint	unk0

0x146 - SwitchRandom

Parameters
#	Type	Name	Description
1	uint	max_value

0x147 - SwitchScenario

Parameters
#	Type	Name	Description
1	GameVar	var

0x148 - SwitchScenarioLevel

Parameters
#	Type	Name	Description
1	GameVar	var

0x149 - SwitchSector

No parameters.

0x14a - SwitchValue

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2

0x14b - SwitchVariable

Parameters
#	Type	Name
1	GameVar	var
2	uint	unk1
3	uint	unk2